Madbull GSG-01 Stun Noise Shot(CO2 powered)(Black)

Description:

Noise: Over 120db

Weight: 240g

Material: Metal

System: CO2(Rechangeable)

How to use:

Step 01: Push the "gas valve" into head and pull the "deco ahmmer" back and hold it.

Step 02: inverse the spoon and use the hole on the spoon to adjust "gas valve". Remember, you have to align the "gas valve" to the head and then, the spoon can be instakked correctly.

Step 03: Hold the "deco hammer" and insert the spoon. (Make sure the spoon align the "gas valve" If not, the spoon can't be completely installed.) Insert the safety pin into the right hole on the "head."

Step 04: Timing Adjustment: Use allen wrench to adjust the screw on the "gas valve." Turn clockwise to the tightest status and use full pressure 800 PSI Co2 pressure. The delay time will be 5~10 second. You can turn it counter-clockwise or using the different pressure Co2 to adjust the timing. The timing is all depends on the screw and pressure of Co2. (The index lines on the "gas valve" are for you adjustment reference.)

Step 05: Fill liquid Co2 into the GSG-01 to get full pressure and make sure there is no leaking. Hold the spon and pull out the pin. Once you release the spon, the GSG-01 should be detonated anytime. Don't insert anything into the GSG-01. GSG-01 can only make loud sound for training purpose.